Please note: Prices do not include PDI & Freight for all brands except for Cub Cadet and exMark.

2018 Exmark RAX730GKA604A3

On Sale
$8,399.00
Was $9,989.00

Stock Image

Campbell-Peterson Trail & Turf
220 Hadley Rd
Greenville, PA 16125

Hours of Operation

	Open	Close
Mon	8:30 a.m.	6:30 p.m.
Tue-Wed	8:30 a.m.	5:00 p.m.
Thu	8:30 a.m.	6:30 p.m.
Fri	8:30 a.m.	5:00 p.m.
Sat	8:30 a.m.	1:00 p.m.
Sun	Closed

Apply for Financing Insurance Quote

Sale: Save $1,590.00 now until 6/30/2019

New/Used

New

Availability

In Stock

Location

Campbell-Peterson Trail & Turf

Title

Clean

Condition

Excellent

Year

2018

Manufacturer

Exmark

Model

RAX730GKA604A3

Overview

Description

Check out the Exmark Radius X-Series, the latest in commercial zero turns.

Exmark Radius X-Series delivers the cut quality and durability professionals demand with a host of new features and innovations. Powered by Kawasaki FX engines, with Hydro-Gear integrated transmissions and up to 10 mph fwd. ground speed, Radius X-Series improves productivity, but a full-suspension operator seat with operator preference dial and elastometric vibration control (EVC) means maximum comfort. Cutting deck widths available: 48, 52 and 60 inches.

Features

UltraCut Deck Technology: Exmark's exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark's exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
Heavy Duty Unibody Frame: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Quick Adjustable Rollover Protection System (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Fuel Gauge Window: Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Height of Cut Made Easy: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
Comfort Stepped Up: X-Series machines step up to Exmark's full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.
Service Made Easy: A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.

Equipment

Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires: 24 x 10.5-12 K500
Cup Holder: Standard
Tractor Frame: Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
Parking Brake: Lever-actuated pawl brake.
Seat: Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Electrical: 12-volt battery with 15-amp alternator.

Power Components

Engine Brand: Kawasaki®
Engine Model: FX730V
Engine Displacement: 726
Engine Series: V-Twin
Engine Type: Carbureted
Engine Speed: 3,700 rpm
Air Filter: Cyclonic Air Cleaner
Fuel Type: Gas Carbureted
Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator: Translucent Visual
Drive: Hydro-Drive
Drive Description: Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed: Infinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-6.0 mph (9.7kmph) reverse.
Carb Compliant: No
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release: Allows unit movement without engine running.
Casters: .375" thick caster yoke arms
Model Description: Radius X-Series 23.5 HP* Kaw FX730V w/60" UltraCut Series 4 Deck, Susp Seat & Wide Pneum

Decks

Width / Cutting Deck: 60"
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades: 3 Blades at 20.50" Length

Dimensions

Width: 72.7 in (184.7 cm)
Length: 82.2 in (208.8 cm)
Height: 70.4 inches (178.8 cm)
Curb Weight: 1006

NOTES:

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.